135k BTU 95% AFUE MrCool Signature Gas Furnace - Upflow/Horizontal - 24.5" Cabinet - Low NOx

Best Answer: Thank you for your questions about the 135k BTU 95% AFUE MrCool Signature Gas Furnace - Upflow/Horizontal - 24.5" Cabinet - Low NOx. To answer your first question, the defrost cycle on this furnace works by temporarily switching the heating system into cooling mode. This causes any ice or frost that has accumulated on the outdoor unit to melt and drip off, ensuring that the system continues to operate efficiently. As for your second question, the indoor coil module on this furnace is designed to be located downstream of the furnace section. It is not recommended to locate it upstream of the furnace section as this could potentially affect the performance of the system. Finally, to answer your third question, the thermostat for this furnace is not designed to be a 2-stage heat system. It is only compatible with single-stage heating systems. However, it is possible to use a 2-stage thermostat with a variable heat pump and gas heat by installing a separate control system for the gas furnace. This would allow the thermostat to control both the heat pump and the gas furnace, switching between the two as needed to provide optimal heating for your home. Thank you again for your questions. If you have any other concerns or inquiries about this furnace, please don't hesitate to contact us.

Best Answer: The MrCool MGM95SE135D5XA gas furnace comes with a 20-year heat exchanger warranty and a 10-year limited parts warranty. The warranty must be registered online within 60 days of installation.

Best Answer: Yes.

Best Answer: The MrCool MGM95SE is upflow and horizontal. The MGD95SE is downflow. You can find it here: https://iwae.com/shop/110k-btu-95-afue-variable-speed-mrcool-signature-gas-furnace-with-coil-cabinet-downflow-21-cabinet-low-nox-ha18233.html

Best Answer: Thank you for your question about the MGM95SE135D5XA 135k BTU 95% AFUE MrCool Signature Gas Furnace.

To answer your question, yes, it is possible to "twin" this unit. "Twinning" refers to the process of installing two furnaces in a single heating and cooling system to increase the overall capacity and efficiency of the system. This is often done in larger homes or commercial buildings where a single furnace may not be sufficient to heat the entire space.

There are a few key considerations to keep in mind when twinning furnaces:

Size: It is important to ensure that the combined capacity of the two furnaces is sufficient to heat the entire space. Over-sizing or under-sizing the system can lead to inefficient operation and increased energy costs.

Location: The two furnaces should be installed in a location that allows for easy access and maintenance. It is also important to consider the location of the air ducts and vents to ensure proper airflow throughout the building.

Control: It is important to have a control system in place to manage the operation of the two furnaces. This can be done through a thermostat or a central control system.

Overall, twinning furnaces can be a cost-effective and efficient way to heat a large space, but it is important to carefully consider the size, location, and control of the units to ensure proper operation. If you have any further questions or concerns, please don't hesitate to reach out to our sales office for assistance.

Best Answer: It could. Call us at 270-575-9595 and we will make sure it fits your specifications. If it doesn't, we can help you find something that does.