Overview
Combine gas and electric capabilities with this 3 Ton 14 SEER 36k BTU MrCool MPG36 Gas & Electric Package Unit! This unit comes with certifications including AHRI Listed and ETL Certification, so you can rest assured you are making a proven purchase for your home. It's a purchase you'll know is effective thanks to the 14 SEER cooling and 81% AFUE heating performance.
This gas and electric package unit can be installed in a down discharge or horizontal position depending on how you need to place the unit for operation. It has eco-safe R410a chlorine-free refrigerant and is made with your convenience in mind. It comes with a stable one piece base design, compact footprint, low profile, rounded corners, and other parts that work to protect your unit from any harm. The exterior is painted a textured, pre-painted steel cabinet finish that looks great in virtually any environment.
Of course, it's like they always say that it's what is on the inside that counts! Inside, the MPG36 has tubing that is made of copper and has enhanced fin coils that generate heat efficiently while reducing the amount of heat lost during operation. There is also an aluminized tubular heat exchanger, insulated blower, and direct spark ignition.

Manufacturer Highlights
The MRCOOL 3 ton Air Conditioner & Gas Package Unit combines a high performance 14 SEER air conditioner with a powerful gas furnace to deliver the best air comfort possible in all weather conditions. Like all MRCOOL products, this hybrid system is competitively priced, suitable for residential or commercial installation, and will run smoothly for years to come. The 3 ton Air Conditioner & Gas Package Unit is a fully self-contained, combination gas heating/electric cooling unit designed for outdoor installation. All unit sizes have return and discharge openings for both horizontal and down flow configurations, and are factory shipped with all down flow duct openings covered. Units may be installed either on a rooftop or on a cement slab. In gas heating mode, this unit is designed for a minimum continuous return-air temperature and a maximum continuous return-air temperature.
Standard Features
- Warranty is 15 year on heat exchanger and 10 years on parts when registered
- Insulated low profile cabinet with rounded corners and one piece base is stable, safe and attractive
- Features a high efficiency compressor designed to operate smoothly, quietly, and consistently
- Architecturally compatible to fit a small footprint, convenient for installation and maintenance
- All units ETL and ETLC approved and AHRI certified
- Optional LP & High Altitude Kits available
- Approved for installation in manufactured housing and mobile homes
- Aluminized Tri-Dimple tubular heat exchanger for increased efficiency
- Uses evironmentally friendly R410A refrigerant
- Efficient multi-speed motor for wide airflow range
- Made in the USA
Warranty Terms
For a full description of all warranties applicable to this product as well as individual manufacturer requirements, please review the manufacturer's consumer brochure and/or product warranty documents. Online warranty registration must be completed within 60 days of installation. Due to state laws, online registration is not required in California or Quebec. Call for warranty availability on scratch & dent and surplus items.
Installation of any product must comply with all applicable codes and regulations. The service of a certified and trained electrical technician may be required for the installation process.
Specifications
Model | MPG36S090M414A |
---|---|
UPC | 810512031450 |
Air Flow Direction | Downflow, Horizontal |
Avg Coverage Area | 1,500 - 1,800 Sq Ft |
Blower Motor | Multi Speed |
Compressor | Single Stage |
Cooling Capacity | 3 Ton |
EER | 11 |
Electrical Phase | 1-Phase |
Max Overcurrent Protection | 35 amps |
Primary Heating Capacity | 85,001 - 90,000 BTU |
Product Height (in) | 36.82 |
Product Length (in) | 46.8 |
Product Width (in) | 46.77 |
Refrigerant | R-410a |
Cooling Efficiency | 14 SEER |
Series | Signature |
Voltage | 240 |
Warranty | 10 Year Parts, 10 Year Compressor, 20 Year Heat Exchanger |
Weight (lbs) | 371.0000 |
Region Compatibility | Nationwide |
California Residents | see Prop 65 WARNING |
Accessories
Reviews
Q & A
Need a replacement