Home
Geo-Pulse Non-Pressurized Geothermal Flow Center - Two Pump

Geo-Pulse Non-Pressurized Geothermal Flow Center - Two Pump

Item: HA12099

Model: GP22K-SU10F-R2

Condition: New

Ask a question

Zoom

Photo Gallery

Overview

Warranty Terms

For a full description of all warranties applicable to this product as well as individual manufacturer requirements, please review the manufacturer's consumer brochure and/or product warranty documents. Online warranty registration must be completed within 60 days of installation. Due to state laws, online registration is not required in California or Quebec. Call for warranty availability on scratch & dent and surplus items.

For additional warranty information, click here.

Installation of any product must comply with all applicable codes and regulations. The service of a certified and trained electrical technician may be required for the installation process.

Specifications

Model	GP22K-SU10F-R2
Electrical Phase	1-Phase
Product Height (in)	34
Product Length (in)	8
Product Width (in)	15
Pumps	2
Voltage	240
Warranty	5 Year
Weight (lbs)	98.0000
Zones	1
California Residents	see Prop 65 WARNING

Reviews

Q & A

Do you have questions about this product?

Hi, I am looking at your Geo-Pulse Non-Pressurized Flow Center - Two Pump. I have 2 closed loops, each being 800 ft. 3/4 inch. Will this pump be able to handle this much pipe?
thanx Mike

What type of electrical connectirs are on the motors? I've never seen tbis type and there's no instruction on how to wire connects. They have little white flip switched, but I can't figure them out.

What is the standard size wiring for power to this double pump unit? Also, can it be wired from the contactor from the main unit?

There are 3 watt settings on the two pump flow center - 1 (eco) 140, 2 215, and 3 (max) 250. What setting do you recommend when connected to a 5 ton Climatemaster Tranquility 30?

I have 5 wells, for a five ton unit, that are supposedly 165' deep, which pump system do I need

We have an open loop on our 5 ton geothermal unit that is killing us - well pump failures, electrical bills. If we swap to a closed loop, will the ground be able to match the efficiency of cool well water in the heat waves of Alabama summers? It ran 20-22 hours/day this past summer. Also, how efficient is the ground loop pump vs a well pump? How far from the house and how much elevation change can a ground loop handle - we are on the side of a hill?
Please advise,
Eric

I have the two pump model. One pump is warm to the touch, and the other pump is cold. I checked because the unit is much quieter than it used to be. What will happen to my furnace performance if just one pump is running, and can I replace the pump on the unit? What is the price for just a replacement pump?

What should my inlet and outlet water temperature difference be on a 5 ton geo cool closed loop with a twin motor geo pulse non pressurized pump be on heat mode and on cool mode? 3000’ of loop line in the ground 6’ deep and 2’ wide trench in Kansas City Missouri.

If I were to purchase a Tranquility 22 with the internal vFlow pump do I still need the two pump flow center?

What is the maximum distance between the flow center and the heat pump, and max distance between the flow center and loop manifolds? Also what type of piping is recommended to use? Thanks

I have a Geo-Pulse Non-Pressurized Flow Center - Two Pump. The top motor is at about 80 degrees and the bottom pump is running at 180 degrees. Is this normal to have the motor run this hot? Thanks! Eric