1.5 Ton 14 SEER Multi Speed Trane RunTru Central Heat Pump Split System - Multiposition

A 1.5 Ton 14 SEER Multi Speed Trane RunTru Central Heat Pump Split System is an affordable and practical choice that will ensure your home is comfortable year round without breaking the bank. This split system includes two appliances: a heat pump and an air handler.

This specific 1.5 Ton 14 SEER Multi Speed Trane RunTru Central Heat Pump Split System is efficient with its 14 SEER rating, and 1.5 ton cooling capacity that will keep your home at your desired temperature all year long.

This heat pump can cool your home when ambient temperatures are as high as 115°F or as low as 55°F. If you require lower temperatures, you can choose from the following additional options: evaporator defrost control unit, an evaporator defrost control unit with a thermostatic expansion valve (TXV), a BAYLOAM107A low ambient kit.

This Trane RunTru Heat Pump features a low vibration when operating for noise reduction. This appliance will happily hum along in the background of your daily activities without being a disturbance.

The Trane RunTru Heat Pump is fully charged at the factory with R410-A refrigerant, which is a greener option than more traditional refrigerants. This refrigerant is controlled with a thermal expansion valve (TXV) that maintains a constant heat for top performance and is aided with a condenser fan, compressor contactor, and low and high pressure switches.

For safety, the scroll compressor in this heat pump features internal overcurrent protection and over temperature protection. Other scroll compressor features include its centrifugal oil pump and low vibration.

The condenser coil in this Trane RunTru Heat Pump is made entirely of aluminum, provides low airflow resistance, and efficiently transfers heat. This outdoor coil is protected on all four sides by louvered panels, and the unit's outdoor propeller fan is dynamically and statically balanced.

This particular model is the slimmest in this line of Trane RunTru Heat Pumps, measuring 28.6 high by 23.6 wide by 23.6 deep. The Trane RunTru heat pump split system cabinet is made of heavy gauge, galvanized steel that has a weather-resistant powder paint finish for additional strength and protection. The corner panels are also pre-painted for durability. Every Trane RunTru cabinet panel is subject to a 1,000 hour salt spray test to prove it will provide long term protection for your unit.

With a Trane RunTru Air Handler, you can expect a quiet, efficient, and affordable solution to managing your home's comfort level. This multiposition, multi-speed Trane RunTru air handler has a 1.5 ton capacity, uses fused 24 volt power, and is cooling and heat pump compatible. Powering this appliance is a permanent split capacitor, or PSC motor, that has a multi-speed fan.

Trane RunTru Air Handlers use an all aluminum coil with an enhanced patented coil fin. This unit uses an orifice flow control with an R-410A/R22 orifice piston. This particular model Trane RunTru Air Handler uses a ¾ suction line and ⅜ liquid line. The entire appliance measures about 45 high by 18.5 wide by 21 deep.

Trane RunTru Air Handlers use a draw through design where the supply fan is installed after the coils and draws the air through the unit and into your space. The air handler is multi-position and can move to affect your home's air flow, whether that's an adjustment up, down, left, or right. Each air handler's flow controls are factory installed and shipped straight to your home.

To ensure your air handler operates as efficiently as possible, it is housed in a fully insulated galvanized steel cabinet with captured foil face insulation that has an R-4.2 insulating value. With this high quality insulation to keep heat within the appliance, Trane RunTru Air Handlers have 2% or less air leak. The cabinet for this air handler also features a horizontal drain pain to capture escaped moisture from the air conditioning process.

This 1.5 Ton 14 SEER Multi Speed Trane RunTru Central Heat Pump Split System is a practical heating and cooling solution for homeowners that is designed, assembled, and tested in the USA.