Up to 6 months 0% APR Financing Available! Learn More >

This product has been discontinued.

The manufacturer has discontinued this product permanently. Please see the alternative product below.
Out of stock
Loading...
Accessories
Description / Documents

Stay comfortable in every season of the year with this 2 Ton 15 SEER 60K BTU 80% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System that includes a heat pump, an evaporator coil, and a gas furnace. These three practical and efficient appliances work together to deliver a complete HVAC solution that will meet your heating and cooling needs.

The Trane RunTru Central Heat Pump in this 2 Ton 15 SEER 60K BTU 80% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System cools your home efficiently with a 14 SEER rating and 2 ton capacity. This heat pump runs quietly with a low vibration so it won't disturb your daily activities. It is pre-charged with R-410A refrigerant, an eco-friendly refrigerant that does not harm the ozone layer like more traditional options. The all-aluminum condenser coil provides low airflow resistance, efficiently transfers heat, and is protected from damage on all four sides with louvered panels.

This Trane RunTru Central Heat Pump has safety features built into the system to protect your home and family in addition to ensuring the unit works properly. These safety measures include over temperature and overpressure protection.

This heat pump unit has a small footprint, measuring 28.6 high by 25.6 wide by 25.6 deep. For strength and protection, the Trane RunTru Central Heat Pump is housed in a galvanized steel cabinet that is treated with a durable weather-resistant powder paint finish. The cabinet's corner panels are pre-painted, and all cabinet panels are tested with a 1,000 hour salt spray to make sure the casing can withstand the test of time, even for homes on the coast.

To clean the heat pump's exterior, wipe the cabinet down with a clean rag, soap, and water. If the casing develops stubborn stains, choose a stronger household detergent. No specialty materials are required. If you live in a coastal area, the manufacturer recommends regularly wiping down the cabinet with fresh water to remove built up salt.

The Trane RunTru Cased Evaporator Coil in this 2 Ton 15 SEER 60K BTU 80% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System is practical, durable, and efficient. This coil has a 1.5 to 2 ton capacity, and like the air conditioner in this set, it uses the environmentally friendly R-410A refrigerant. The refrigerant in this coil is controlled with a factory installed piston.

The cabinet surrounding the Trane RunTru Cased Evaporator Coil is galvanized steel and fully insulated to keep your system running efficiently. The cabinet's drain pan protects your floor from moisture created during the air conditioning process. This drain pan is double-sloped and can withstand high temperatures.

You can trust that your family will stay warm throughout many winters with a Multi Speed Trane RunTru Gas Furnace. This appliance runs with multiport, inshot burners, providing your home with many years of efficient, quiet service. This gas furnace has a 60,000 BTU capacity, 3 ton nominal air flow, and 80% annual fuel utilization efficiency (AFUE) that can keep your utility bills low during seasons of high use. The heat exchanger is made of tubular aluminized steel, which provides a wider range of operation and increases the furnace's efficiency.

The Multi Speed Trane RunTru Gas Furnace can be installed in one of four configurations: upflow, downflow, horizontal left, or horizontal right. If you need to use liquified petroleum (LP) gas as your fuel source, you will need to purchase a separate conversion kit to easily switch from natural gas and meet your home's needs.

The gas furnace in this 2 Ton 15 SEER 60K BTU 80% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System can be installed in tight spaces like basements or closets with its dimensions of 34 high by 17.5 wide by nearly 29 deep. The heat exchanger in a Multi Speed Trane RunTru Gas Furnace is made of durable and cycle tested heavy gauge tubular aluminized steel, which efficiently transfers heat to warm your space quickly.

Instead of a standard PSC motor, this gas furnace uses a more efficient constant torque blower motor that features nine speeds. This single-stage, non-condensing gas furnace uses a centrifugal combustion fan to evenly distribute heat throughout your home. The power vent blower is low energy and ensures the gas fumes are discharged outdoors.

This system does not use a pilot light that constantly burns. Instead, the furnace starts using a silicon nitride hot surface ignition system that lights the main burners on demand when needed. This gas furnace features an integrated control that includes setup functions, system status, diagnostics, and a digital display. The control unit is a solid state device that continuously monitors the gas furnace for the presence of flame to ensure your family is safe.

The casing of the Multi Speed Trane RunTru Gas Furnace is made of durable galvanized steel, and the cabinet is designed to be energy efficient with its Air-Titeâ„¢ design. The manufacturer certifies that this appliance has less than 1.4% air leak per ASHRAE 193 standards. The heavy gauge steel cabinet wraps around the furnace to give additional strength, and every installation orientation has two venting options and no knockouts. All three appliances in this system are designed, tested, and assembled in the USA.

Customer Reviews / Q&A
Specifications

System Overview

Model A4HP4023A1000,A801X060BM3S,A4MXB1832AC6H
UPC 850017455115
AHRI Number 204595901
Gas Furnace Efficiency 80%
Bundle Avg Coverage Area 1,000 - 1,200 Sq Ft
Bundle Cooling Capacity 2 Ton
Bundle Cooling Efficiency 15 SEER
EER 12.5
Heat Pump Efficiency (HSPF) 8.50
Region Compatibility North

A801X060BM3S Specifications:

Model A801X060BM3S
UPC 850017455405
AHRI Number 204606301
Product Height (in) 34
Gas Furnace Efficiency 80%
Product Length (in) 28.75
Configuration Floor Mounted
Product Width (in) 17.5
Air Flow Direction Downflow, Horizontal, Upflow
Avg Coverage Area 1,500 - 1,800 Sq Ft
Blower Motor Multi Speed
Cooling Compatibility (up to) 3 Ton
Electrical Phase 1-Phase
Exhaust Pipe Metal
Fuel Source Natural Gas
Gas Valve Single Stage
Max Overcurrent Protection 15 amps
Weight (lbs) 130.000000
Primary Heating Capacity 55,001 - 60,000 BTU
System Application Type Central Split Systems
Voltage 120
Warranty 5 Year Parts, 20 Year Heat Exchanger

Ways to Save as You Shop

IWAE Insiders ProgramIWAE Insiders Program
IWAEPros ProgramIWAEPros Program
Financing with IWAEFinancing with IWAE
IWAE Rebate FinderIWAE Rebate Finder
Labor Warranty at IWAELabor Warranty at IWAE
Loading...
Loading...