2 Ton 15 SEER 60K BTU 96% AFUE 2 Stage Variable Speed Trane RunTru Central Heat Pump & Gas Furnace Split System - Upflow/Horizontal

This 2 Ton 15 SEER 60K BTU 96% AFUE 2 Stage Variable Speed Trane RunTru Central Heat Pump & Gas Furnace Split System is an excellent option for heating and cooling your home, making your space comfortable in every season. This split system includes three appliances: a heat pump, a gas furnace, and an evaporator coil.

The 2 Ton 15 SEER 60K BTU 96% AFUE 2 Stage Variable Speed Trane RunTru Central Heat Pump & Gas Furnace Split System has a rane RunTru Central Heat Pump that can efficiently heat and cool your home with its 14 SEER rating. This particular unit has a 2 ton capacity and uses a ⅜ liquid line and a ¾ suction line. This heat pump condenser runs quietly and won't interrupt you or your neighbors' daily activities. You are always in control of managing your home's comfort with a Trane RunTru Central Heat Pump.

The condenser is pre-charged with R-410A refrigerant, an eco-friendly refrigerant that does not harm the ozone layer. The all-aluminum condenser coil for this appliance provides low airflow resistance, efficiently transfers heat, and is protected from damage with louvered panels on all sides. This Trane RunTru Central Heat Pump has safety features built into the system, including over temperature and overpressure protection.

This particular outdoor unit has a small footprint, measuring 28.6 inches high, 25.6 inches wide, and 25.6 inches deep. The Trane RunTru Central Heat Pump is housed and protected in a heavy galvanized steel cabinet that is treated with a weather-resistant powder paint finish. The cabinet's corner panels are pre-painted and tested with a 1,000 hour salt spray, making sure the casing can withstand the test of time, even places with high air salinity that can be destructive over time.

To keep your unit clean, simply wipe it down with soap and water. If the unit develops more stubborn stains, use a stronger household detergent. If you live in a coastal area, the manufacturer recommends regularly wiping down the exterior with fresh water.

For a steady stream of warm air throughout your home during the cold winter months, the Trane RunTru 2 Stage Gas Furnace in this set delivers quality service. This appliance has a 40,000 BTU capacity, 3 ton nominal air flow, and 96% annual fuel utilization efficiency (AFUE) that meets utility rebates and can save money. This gas furnace's multiport inshot burners operate efficiently and quietly.

The American Gas Association has certified this gas furnace for use with both natural and liquefied petroleum (LP) gas. The standard setup for this gas furnace is natural gas, but this model can easily be converted for use with LP gas with a separately purchased conversion kit.

The primary heat exchanger in this Trane RunTru 2 Stage Gas Furnace is made of corrosion resistant, cycle-tested, heavy gauge tubular stainless steel, and the secondary heat exchanger is made of specialty 29-4C™ stainless steel that is able to reclaim heat from flue gases.

The high-efficiency blower motor is designed to improve the comfort of your home and decrease energy use. The motor features variable speeds and provides adequate airflow for most heating and cooling requirements.

This Trane RunTru 2 Stage Gas Furnace features an integrated system control that continuously monitors for the presence of flame. This solid state device has an exclusively designed operational program to view and manage the gas furnace's limit sensors, blowers, and gas valve. The integrated control system also digitally displays self diagnostic information.

Instead of a pilot light that constantly burns, this gas furnace uses a silicon nitride hot surface ignition system that lights the main burners on demand, only when you need them. This eliminates waste and the chore of checking and relighting the pilot.

The Trane RunTru 2 Stage Gas Furnace is wrapped inside a heavy gauge steel cabinet for additional strength and is certified to leak 1.4% or less of nominal air conditioning. The model in this split system can be installed in one of three configurations: upflow, horizontal left, or horizontal right. Each of these setups allows for two venting options and has no knockouts in the casing.

The Trane RunTru Evaporator Coil in this 2 Ton 15 SEER 60K BTU 96% AFUE 2 Stage Variable Speed Trane RunTru Central Heat Pump & Gas Furnace Split System is affordable, durable, and efficient. This split system's evaporator coil has a 1.5 to 2 ton capacity. Like the air conditioner in this set, this evaporator coil uses the environmentally friendly R-410A refrigerant. This refrigerant is controlled with a factory installed piston.

The cabinet housing the Trane RunTru Evaporator Coil is galvanized steel and fully insulated to keep your system running efficiently. The cabinet's drain pan protects your floor from moisture created during the air conditioning process, is double-sloped, and can withstand high temperatures.