3.5 Ton 15 SEER 100K BTU 96% AFUE 2 Stage Variable Speed Trane RunTru Central Air Conditioner & Gas Furnace Split System - Upflow/Horizontal
Shop All RUNTRU

This product has been discontinued.
Recommended Alternative:
Accessories
Description / Documents
For a practical and affordable option for keeping your home comfortable year round, consider a 3.5 Ton 15 SEER 100K BTU 96% AFUE 2 Stage Variable Speed Trane RunTru Central Air Conditioner & Gas Furnace Split System. The appliances included in this set are a Trane RunTru Central Air Conditioner, 2 Stage Gas Furnace, and Multiposition Cased Evaporator Coil. With these reliable appliances, you will receive long lasting service that may reduce your monthly utility bill.
This 3.5 Ton 15 SEER 100K BTU 96% AFUE 2 Stage Variable Speed Trane RunTru Central Air Conditioner & Gas Furnace Split System features a Trane RunTru Central Air Conditioner that has a 14 SEER rating and a 3.5 ton cooling capacity. Keep your home nice and cool during the hottest summers with this unit that is made with durable, high quality components. The appliance is factory pre-charged with R-410 refrigerant, a greener option that doesn't damage the ozone layer. This air conditioner includes a condenser fan, compressor contactor, and high and low pressure switches that control its refrigeration system. The Trane RunTru Central Air Conditioner in this split system measures 28.6 high by 34.3 wide by 34.3 deep.
Stay comfortable when temperatures begin to rise with this air conditioner that can effectively cool when outdoor temperatures are as high as 115°F. This Trane RunTru Central Air Conditioner operates quietly, keeping you and your neighbors interruption free. The low vibration causes approximately 76 dB of noise.
The all-aluminum condenser coil in this unit provides low airflow resistance, efficiently transfers heat, and is protected on all four sides with louvered panels. To ensure your unit operates safely, this appliance features both over temperature and overpressure protection.
This Trane RunTru appliance is housed in a cabinet made of heavy gauge galvanized steel that is treated with a weather-resistant powder paint finish for additional durability. The exterior corner panels are pre-painted and tested with a 1,000 hour salt spray to ensure the casing is long-lasting, even in areas near saltwater.
Keeping your unit clean is simple. You can wipe it down with simple soap and water. If your unit develops more stubborn stains, use a common household detergent. For those living on the coast, wiping down the appliance with fresh water regularly is recommended.
The Trane RunTru 2 Stage Gas Furnace will heat your home with its 100,000 BTU capacity, 4 ton nominal air flow, and 96% annual fuel utilization efficiency (AFUE) that meets utility rebates. The furnace's multiport inshot burners run efficiently and quietly, humming along in the background of your daily life without adding any unnecessary noise.
The American Gas Association has certified this Trane RunTru gas furnace for use with natural or liquefied petroleum (LP) gas. While this unit's default setup is for natural gas, you can easily convert it to LP gas with a separately purchased conversion kit. The heat exchangers in this furnace are made of heavy gauge tubular stainless steel that is cycle-tested and corrosion resistant, and the secondary heat exchanger is made of specialty 29-4C™stainless steel that reclaims heat from flue gases and improves your system's efficiency.
The blower motor in a Trane RunTru gas furnace will work to keep you comfortable when temperatures begin to fall, it creates enough airflow for most heating and cooling requirements, and the blower features variable speeds.
As a safety precaution, this Trane RunTru 2 Stage Gas Furnace has an integrated system control that continuously monitors for the presence of flame. This solid state device runs on an exclusively designed operational program, so you can manage your system's limit sensors, blowers, and gas valve. The integrated control system includes a display that shows self diagnostic information to help troubleshoot if needed, and a rain shield protects the control unit from condensate.
Instead of a continuously burning pilot light, this Trane RunTru 2 Stage Gas Furnace starts with a silicon nitride hot surface ignition system that lights the main burners on demand and eliminates waste. This ignition system is safer than a pilot light and eliminates the chore of checking and relighting the pilot.
The heavy gauge steel cabinet that surrounds a Trane RunTru 2 Stage Gas Furnace protects the unit's components. The dimensions of this gas furnace model are 34 high by 21 wide by 28.75 deep. Since these measurements are standard for the HVAC industry, this gas furnace is compatible with larger, high-efficiency coils and other common accessories.
This gas furnace can be installed out of the way in tight spaces, such as small closets or short basements. The manufacturer certifies that this gas furnace leaks 1.4% or less of nominal air conditioning, in compliance with ASHRAE standards.
This model has three setup configurations: upflow, horizontal left, or horizontal right. Each of these setups includes two venting options without cabinet knockouts. The Trane RunTru 2 Stage Gas Furnace is Fan Energy Rating (FER) compliant. The unit's limit setting and rating data were established and approved under conditions established by the American National Standards Institute (ANSI).
With a Trane RunTru Multiposition Cased Evaporator Coil in the 3.5 Ton 15 SEER 100K BTU 96% AFUE 2 Stage Variable Speed Trane RunTru Central Air Conditioner & Gas Furnace Split System, you can expect a low cost, long lasting, and efficient system for keeping your home comfortable all year long. This evaporator coil is adaptable, can be used with both cooling and heat pump systems, and features a 3 to 3.5 ton capacity.
Trane RunTru Multiposition Case Evaporator Coils are all aluminum and are approved for use in manufactured and mobile homes, though they can be used in any home or business arrangement. The dimensions of this Trane RunTru Multiposition Case Evaporator Coil are 22.5 high, 21 wide, and 21.5 deep.
The case that houses this evaporator coil is made of incredibly durable and long lasting galvanized steel. The cabinet is fully insulated to ensure your system works efficiently and includes a double-sloped drain pan that is made to withstand high temperatures. This drain pan protects your floor from moisture created during the air conditioning process.
From the Manufacturer
Customer Reviews / Q&A
Specifications
System Overview
| Model | A4AC4042A1000A,A952V100CU4SAB,A4MXC4248AC6HA |
|---|---|
| UPC | 850017455061 |
| AHRI Number | 204595716 |
| Gas Furnace Efficiency | 96+% |
| Bundle Avg Coverage Area | 1,750 - 2,100 Sq Ft |
| Bundle Cooling Capacity | 3.5 Ton |
| Bundle Cooling Efficiency | 15 SEER |
| EER | 12.5 |
| Region Compatibility | Nationwide |
A952V100CU4S Specifications:
| Model | A952V100CU4S |
|---|---|
| UPC | 850017455238 |
| AHRI Number | 204606321 |
| Product Height (in) | 34 |
| Gas Furnace Efficiency | 96+% |
| Product Length (in) | 28.75 |
| Configuration | Floor Mounted |
| Product Width (in) | 21 |
| Air Flow Direction | Horizontal, Upflow |
| Avg Coverage Area | 2,000 - 2,400 Sq Ft |
| Blower Motor | Variable Speed |
| Cooling Compatibility (up to) | 4 Ton |
| Electrical Phase | 1-Phase |
| Exhaust Pipe | Metal |
| Fuel Source | Natural Gas |
| Gas Valve | Two Stage |
| Max Overcurrent Protection | 15 amps |
| Weight (lbs) | 154.000000 |
| Primary Heating Capacity | 95,001 - 100,000 BTU |
| System Application Type | Central Split Systems |
| Voltage | 120 |
| Warranty | 5 Year Parts, 20 Year Heat Exchanger |
- Regular Price:
- Your Price:




