3/8" x 3/4" MrCool No-Vac Quick Connect Pre-Charged Line Set for Universal Split System - R410a

Do you need a pre-charged line set for your MrCool Universal 2-3 Ton or 4-5 Ton system? Then you need this 3/8" x 3/4" MrCool Universal Quick Connect Pre-Charged Line Set. This easy-to-use line set greatly simplifies the installation process. It is pre-charged from the factory for the precise amount of refrigerant necessary for both the 2-3 ton & 4-5 ton MrCool Universal heat pump split system. Which means that this line set requires no charging in the field and no vacuuming. It is 100% ready to go right out of the box.

But that's not all that makes a MrCool Universal Quick Connect pre-charged line set such a valuable piece of equipment. It uses simple screw-on Quick Connect valves that hook up snugly. Plus, this leak-proof line set is kink resistant to protect it during installation. It is much harder to accidentally bend and damage this pre-charged line than similar conventional line sets.

A MrCool Universal Quick Connect pre-charged line set is also amply protected against wind, rain, and other potentially damaging environmental factors. This pre-charged line set is wrapped in tough 'Gator-Flextra' UV protective insulation. Not only will this insulation help prevent efficiency loss, but it is an impenetrable barrier for sun, weather, and rodents. This is just one more way that MrCool is protecting your Universal investment for the long term.

Of course, installation flexibility is very important. One size rarely fits all, and that's why this MrCool Universal Quick Connect pre-charged line set is available in 15', 25', 35', and 50' length increments. That is more than sufficient for most homeowners in the United States.

Most, but not all. If you're one of the few that will need more than a 50' line set or need to connect together two shorter length line sets, you can use a MrCool Universal Quick Connect coupler kit to link together two MrCool Universal Quick Connect pre-charged line sets. The coupler is just as easy to use as the standard line set. Plus, it provides virtually unlimited installation flexibility when it comes to running the line set across your property.

Should you so desire, a MrCool Universal heat pump central split system can be installed with a conventional flare fitting. However, when you step back and look at all the advantages that a MrCool Universal Quick Connect Pre-Charged Line Set can deliver, why would you rely on old-fashioned technology? A brand new pre-charged line set will let you install your Universal system simply, quickly, and safely. It is a highly effective tool to get a MrCool Universal heat pump up and running as quickly as possible, so you can start saving money and enjoying great air comfort as quickly as possible.

Because why should you have to wait to live well?