40K BTU 80% AFUE Multi Speed Trane RunTru Gas Furnace - Multiposition - 17.5" Cabinet

For a heating option made in the USA, choose the 40K BTU 80% AFUE Multi Speed Trane RunTru Gas Furnace - Multiposition - 17.5inch Cabinet to quickly heat your home during the winter months. Trust that your family will stay comfortable and cozy each winter night with this Trane RunTru gas furnace.

This 40K BTU 80% AFUE Multi Speed Trane RunTru Gas Furnace - Multiposition - 17.5inch Cabinet features multiport, inshot burners to provide your family with many years of quiet and efficient service. This specific model has a 40,000 BTU capacity and 80% annual fuel utilization efficiency (AFUE) to keep your utility bills low during seasons of high use.

This unit's heat exchanger is tubular aluminized steel, which provides a wider range of operation and increases the unit's efficiency. With this appliance there is little chance of specification errors because the flexible system can be installed four ways: upflow, downflow, horizontal left, or horizontal right.

If you are looking for a liquified petroleum (LP) gas furnace, you can purchase a separate conversion kit to easily switch the fuel type.

Trane RunTru multiposition gas furnaces are easier to move, can fit into tight spaces, such as basements or closets, and work well with large, high-efficiency coils.

The 40K BTU 80% AFUE Multi Speed Trane RunTru Gas Furnace - Multiposition - 17.5inch Cabinet dimensions are 34 high, 17.5 wide, and nearly 29 deep.

Trane RunTru gas furnaces operate with a durable and cycle tested heavy gauge tubular aluminized steel heat exchanger that efficiently transfers heat to warm up your home in no time on chilly nights.

Instead of a standard PSC motor, this Trane RunTru gas furnace uses a more efficient constant torque blower motor that has 9 speed settings. The constant torque blower motor produces enough airflow for most heating and cooling requirements and can switch from heating to cooling speeds on demand, depending on your thermostat's settings.

This single-stage, non-condensing gas furnace uses a centrifugal combustion fan to evenly distribute heat. The appliance's power vent blower is low energy and increases efficiency. The blower discharges gas fumes outdoors.

This system does not have a pilot light that constantly burns. Instead, Trane RunTru gas furnaces use a silicon nitride hot surface ignition system that lights the main burners on demand when needed.

Trane RunTru furnaces feature an integrated control that includes setup functions, the furnace status, diagnostics, and a digital display. The control unit is a solid state device that continuously monitors the furnace for the presence of a flame when heating and gives you total control of the limit sensors, blowers, gas valve, and flame control. A rain shield covers the integrated furnace control to protect it from condensation.

For an additional layer of safety, this gas furnace features a dual solenoid combination gas valve and regulator.

The housing that protects the furnace components is made of durable galvanized steel. This cabinet is designed to be energy efficient with its Air-Tite™ design and is certified to have less than 1.4% air leak per ASHRAE 193. The casing for this gas furnace is designed to reduce your energy use.

The heavy gauge steel cabinet wraps around the furnace to strengthen the unit, and every installation orientation has two venting options. That cabinet has no knockouts and is compatible with industry standard coils and other common accessories.

Intertek certifies the Trane RunTru multiposition gas furnace design for use with natural and liquid petroleum (LP) gas. The limit setting and rating data are in line with the standards of the American National Standards Institute (ANSI). This particular 40K BTU 80% AFUE Multi Speed Trane RunTru Gas Furnace - Multiposition - 17.5inch Cabinet was designed, assembled, and tested in the USA and manufactured at a plant in Trenton, New Jersey.