60K BTU 80% AFUE Multi Speed Trane RunTru Gas Furnace - Multiposition - 17.5" Cabinet


Get $100 Cash Back on Your Qualifying Purchase
- Spend over $1000 on heating and air equipment.
- Share this video publicly on your existing Facebook news feed. https://youtu.be/O4nmrlbF0aA
- Email a screenshot of the video on your facebook profile to [email protected] along with your order number.
- Get a check mailed to you for $100.
Limited Time Offer. Act Now!
Rebate only valid for qualifying purchases made after September 19, 2022 until further notice. Rebate claim limited to one per customer. Purchase must be made prior to sharing video. Please allow 1-2 weeks for processing. May not be used in conjunction with any other offer or discount. Video privacy setting must be public.
Contact an expert now.
You can trust that your family will stay comfortable and cozy each winter night with a 60K BTU 80% AFUE Multi Speed Trane RunTru Gas Furnace - Multiposition - 17.5inch Cabinet. Plus, the unit is designed, tested, and made in the USA.
This 60K BTU 80% AFUE Multi Speed Trane RunTru Gas Furnace - Multiposition - 17.5inch Cabinet runs with multiport, inshot burners that will provide your home with many years of quiet and efficient service. This specific model has a 60,000 BTU capacity, a 3 ton nominal air flow, and an 80% annual fuel utilization efficiency (AFUE) that helps to keep your utility bills low during seasons of high use.
The heat exchanger in this appliance is tubular aluminized steel, which provides a wider range of operation and increases the unit's efficiency. With this appliance there is little chance of specification errors because the flexible system can be installed four different ways: upflow, downflow, horizontal left, or horizontal right.
If your furnace needs to run on liquified petroleum (LP) gas, you can purchase a separate conversion kit to easily switch the fuel type and meet your needs.
Trane RunTru multiposition gas furnaces are fairly easy to move, can be installed in tight spaces like basements or closets, and work well with large, high-efficiency coils.
The unit's dimensions are 34 high, 17.5 wide, and nearly 29 deep.
The heat exchanger in a Trane RunTru gas furnace is made of durable and cycle tested heavy gauge tubular aluminized steel. This component efficiently transfers heat to warm up your home quickly on cold nights.
Instead of a standard PSC motor, this Trane RunTru gas furnace uses a more efficient constant torque blower motor. The constant torque blower motor has nine different speeds and produces enough airflow for most heating and cooling requirements. Depending on your thermostat's settings the Trane RunTru gas furnace can seamlessly switch from heating to cooling speeds on demand.
This single-stage, non-condensing gas furnace uses a centrifugal combustion fan to evenly distribute heat throughout your space. The appliance's power vent blower is low energy, which increases efficiency, and discharges gas fumes outdoors.
This system does not use a pilot light that constantly burns. Instead, Trane RunTru gas furnaces feature a silicon nitride hot surface ignition system that lights the main burners on demand when needed. So there's no need to check if your pilot light is lit.
Trane RunTru furnaces feature an integrated control that includes setup functions, system status, diagnostics, and a digital display. The control unit is a solid state device that continuously monitors the gas furnace for the presence of a flame when heating to ensure your family is safe. The control unit also gives total control of the limit sensors, blowers, gas valve, and flame control. A rain shield covers the integrated furnace control to protect it from condensation.
For an additional layer of safety, this Trane RunTru gas furnaces feature a dual solenoid combination gas valve and regulator.
The casing for the 60K BTU 80% AFUE Multi Speed Trane RunTru Gas Furnace - Multiposition - 17.5inch Cabinet components is made of durable galvanized steel, is designed to be energy efficient with its Air-Tite™ design ,and is certified to have less than 1.4% air leak per ASHRAE 193. The cabinet for the Trane RunTru gas furnace is designed to reduce your energy use and save money.
The heavy gauge steel cabinet wraps around the furnace to give additional strength, and every installation orientation has two venting options. That cabinet has no knockouts, and it is compatible with industry standard coils along with other common accessories.
Intertek certifies the Trane Runtru multiposition gas furnace design for use with natural and liquid petroleum (LP) gas. The limit setting and rating data are determined according to the standards of the American National Standards Institute (ANSI). This 60K BTU 80% AFUE Multi Speed Trane RunTru Gas Furnace - Multiposition - 17.5inch Cabinet model was designed, assembled, and tested in the USA and manufactured at a plant in Trenton, New Jersey.
Model | A801X060BM3S |
---|---|
UPC | 850017455405 |
AHRI Number | 204606301 |
Product Height (in) | 34 |
Gas Furnace Efficiency | 80% |
Product Length (in) | 28.75 |
Configuration | Floor Mounted |
Product Width (in) | 17.5 |
Air Flow Direction | Downflow, Horizontal, Upflow |
Avg Coverage Area | 1,500 - 1,800 Sq Ft |
Blower Motor | Multi Speed |
Cooling Compatibility (up to) | 3 Ton |
Electrical Phase | 1-Phase |
Exhaust Pipe | Metal |
Fuel Source | Natural Gas |
Gas Valve | Single Stage |
Max Overcurrent Protection | 15 amps |
Weight (lbs) | 130.000000 |
Primary Heating Capacity | 55,001 - 60,000 BTU |
System Application Type | Central Split Systems |
Voltage | 120 |
Warranty | 5 Year Parts, 20 Year Heat Exchanger |
California Residents | see Prop 65 WARNING |
Shipping & Delivery
Effective and efficient shipping practices are critical for an online business. That’s why we try our best to ship products within 24-36 hours of receiving your order. It’s why we have no hidden fees, send you tracking information as soon as we receive it, and work with our freight carriers to have units delivered as quickly as possible once they leave our warehouse. If you ever have any questions about shipping, call us at 1-270-575-9595. Notice that shipping outside of the continental US require an additional shipping fee.
Shipping Damage & Missing Items
Unpack and inspect ALL packages for damaged or missing items before accepting your shipment. If any damage is found, note this on the delivery receipt. Although Ingrams Water & Air Equipment is NOT responsible for shipping damage, we can assist with filing a claim against the shipping carrier to cover the cost of damages. Any damages or missing items have to be noted on the delivery receipt prior to signing for and accepting your shipment in order to file a claim. Do not let the delivery driver rush you. It is your right to inspect each and every item. If the delivery driver refuses to wait or doesn't allow you to inspect your items prior to signing, please call us immediately at 1-270-575-9595 and our claims department can offer assistance.
Login and Registration Form