This product has been discontinued.
Overview
If you live in California, you know you need a furnace compatible with your state's strict emissions standards. Don't think that means you have to settle for inferior equipment. A Goodman GCH95 95% AFUE Two-Stage Gas Furnace combines quality components with versatile design features. This unit is built with a dual-diameter tubular heat exchanger, two-stage gas valve with Dual$aver technology, 110V silicon nitride igniter, heavy-gauge cabinet, and a Lifetime Heat Exchanger Limited Warranty.
Staying cozy during the coldest months of the year is a must, and what better way to heat your home than with a Goodman 70,000 BTU gas furnace? Generally suitable for heating areas of approximately 2,000 square feet, this product has been designed with quality and efficiency in mind. With value as a primary consideration, you'll be delighted to know that this gas furnace not only provides heat for your home, but it also performs with your central air conditioner to cool your residence as well.
With its energy-saving, direct-drive circulator blower motor, the GCH95 achieves greater efficiency, reduced noise, and requires less maintenance than older generation furnaces. Its low-fan mode of operation allows constant indoor air circulation, even when the system is off. Improved indoor airflow translates to a better interior balance of temperature and humidity. Homeowners can enjoy an indoor climate specialized to their specific needs all winter long! And with a fully insulated steel cabinet with a baked enamel finish, this Goodman furnace offers quiet function and exceptional indoor comfort.
The CGH95 is equipped with DualSaver technology that provides consistent, gentle heat with a furnace gas valve that is automatically adjusted between settings depending on your thermostat. This automatic feature eliminates temperature swings, meaning greater heating efficiency for your home and higher cost savings for you, the homeowner!
This Goodman furnace has a 95% AFUE rating that means .95 cents of every $1.00 of heating energy expense warms your home! Such a high rating significantly reduces monetary waste, creating high-efficiency value for your home. The GCH95 has also been designed to lessen nitrogen oxide (NOx) emissions which helps to reduce the formation of smog and acid rain. With a furnace that is both good for your pocket book and the environment, the GCH95 is an all-around winner.

Manufacturer Highlights
The Goodman® brand GCH Series Gas Furnace offers energy efficiencies and operating sound levels that are among the best in the heating and cooling industry. Quality manufacturing as well as easy installation and maintenance make this unit one of the best values on the market.
Standard Features
- Dual-diameter tubular heat exchanger
- Two-stage gas valve with Dual$aver™ technology that allows installer to activate the two-stage valve with the flip of a dipswitch
- 110V Silicon Nitride igniter
- Furnace control board with self-diagnostics, color-coded low-voltage terminals, and provisions for electronic air cleaner and 24-volt humidifiers
- Control board stores the last five diagnostic codes in memory; simple push-button activation outputs the fault history to a flashing red LED
- Low constant fan allows homeowner to activate the low heat speed to efficiently circulate air throughout the home
- Self-adjusting feature automatically adjusts to high or low stage based on outside temperature without an outdoor temperature sensor
- Dual-certified for sealed combustion direct vent (2-pipe) or non-direct vent (1-pipe) applications
- Easy-to-install top venting is standard; alternate flue/vent located on the right (GMH95)
- All models comply with California NOx emissions standards
Cabinet Features
- Fully insulated, heavy-gauge steel cabinet with durable baked-enamel finish
- Foil-faced insulation lines the heat exchanger
- Designed for multi-position installation -- upflow, horizontal left or right;
- Airtight solid bottom for side-return applications and easy cut tabs for effortless removal in bottom air inlet applications
- Convenient left/right connection for gas/electric service
- Coil and furnace fit flush for most installations
Warranty Terms
For a full description of all warranties applicable to this product as well as individual manufacturer requirements, please review the manufacturer's consumer brochure and/or product warranty documents. Online warranty registration must be completed within 60 days of installation. Due to state laws, online registration is not required in California or Quebec. Call for warranty availability on scratch & dent and surplus items.
Installation of any product must comply with all applicable codes and regulations. The service of a certified and trained electrical technician may be required for the installation process.
Specifications
Model | GCH950703BX |
---|---|
UPC | 663051484573 |
Gas Furnace Efficiency | 95% |
Air Flow Direction | Downflow, Horizontal |
Configuration | Floor Mounted |
Avg Coverage Area | 1,250 - 1,500 Sq Ft |
Blower Motor | Multi Speed |
Cooling Compatibility (up to) | 3 Ton |
Electrical Phase | 1-Phase |
Exhaust Pipe | PVC |
Fuel Source | Natural Gas |
Gas Valve | Two Stage |
Max Overcurrent Protection | 15 amps |
Primary Heating Capacity | 65,001 - 70,000 BTU |
Product Height (in) | 40 |
Product Length (in) | 28.75 |
Product Width (in) | 17.5 |
System Application Type | Central Split Systems |
Vent Connection | 3 inches |
Voltage | 120 |
Warranty | 10 Year Parts, Lifetime Heat Exchanger, 10 Year Unit Replacement |
Weight (lbs) | 123.0000 |
California Residents | see Prop 65 WARNING |