You have no items in your shopping cart.
Overview
Maintain curb appeal and protect your ductless mini-split condenser with a MrCool Condenser Wall Mounting Kit. Built for heavy condensers that can weigh up to 440 pounds, this kit is strong, attractive, and easy to put together. It can attach securely to virtually any exterior home facade. Also compatible with other ductless condenser products.
Warranty Terms
For a full description of all warranties applicable to this product as well as individual manufacturer requirements, please review the manufacturer's consumer brochure and/or product warranty documents. Online warranty registration must be completed within 60 days of installation. Due to state laws, online registration is not required in California or Quebec. Call for warranty availability on scratch & dent and surplus items.
Installation of any product must comply with all applicable codes and regulations. The service of a certified and trained electrical technician may be required for the installation process.
Specifications
| Model | MB440A |
|---|---|
| UPC | 810035933293 |
| Product Height (in) | 27.5 |
| Product Length (in) | 29.5 |
| Product Width (in) | Adjustable |
| Weight (lbs) | 12.0000 |
| California Residents | see Prop 65 WARNING |
Accessories
Reviews
Q & A
Do you have questions about this product?
Sort by
I see there is no back support bracket. Is this correct?
I'm planning to install 24K BTU unit on the ground floor of a garage studio space. I'd like to mount the condenser on a wall bracket so that I don't have it my driveway outside. Does the outside condenser unit need to be at a lower level than the inside wall mounted unit? In other words, if the indoor unit is 7 feet off the ground, can the outdoor condenser be mounted such that it is also 7 feet or maybe even slightly higher than that?
The manual for the MB440A shows that it comes with a horizontal brace (bracket) between the 2 "L shaped arms. Mr. Cool did at one time have a MB440 (without the "A") and that had not horizontal brace (bracket) between the the "L" shaped arms. So my question is it the model # description wrong or are the pictures completely wrong. (i am looking for the MB440A)
Also, if the unit you are selling is indeed the MB440A, how adjustable are the "L" shaped arms left to right as far as distance between them?
Also, if the unit you are selling is indeed the MB440A, how adjustable are the "L" shaped arms left to right as far as distance between them?
Can this bracket support multiple (stacked) units?
will the MB440a mounting bracket work with a 3 ton DC Inverter / Condenser
MDUO18024036??
MDUO18024036??
Can this be used for the 51k BTU models as well? It has the weight capacity (440lbs) as the specs on that 51k condenser is 224lbs. But not sure if it would work since the condenser has a different layout.
Can this be used for the MrCool 4/5 ton Universal series condenser?
Can this be mounted to fiber cement siding?
Is there a different bracket set for an 18,000 BTU unit?
mounting instruction for mr cool 36000 unit
i see the wall bracket for the mr cool 24-36k call is on backorder. is the condenser compatible with other brand brackets?
Can the bracket be installed upside down? I would like to attach it to my foundation block.
Is this bracket used for the 12k system also or is there a lighter duty support available ?
The specs say 29.5" arm depth, the condenser is 18" deep, the picture shows a condenser mounted 3-4" from brick wall with only about 2" arm length in front of the condenser... Doesn't add up to me... 18"+4"+2"= 24" Is the pictured product different than what's described in specs? Asking because I'm tight on space and don't want 10-12" of arm hanging out in front. Is there a different wall mount system that's shallower? What's the required clearance behind the condenser?
How long are the arms supporting the pump
Get our latest deals and exclusive offers
