2 Ton 15 SEER 40K BTU 96% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System - Upflow/Horizontal

Stay comfortable all year long with this 2 Ton 15 SEER 40K BTU 96% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System. This set includes three top efficient and practical appliances—a heat pump, an evaporator coil, and a gas furnace—that work together for a complete HVAC solution that will meet your needs.

The Trane RunTru Central Heat Pump in this 2 Ton 15 SEER 40K BTU 96% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System cools your home efficiently with its 14 SEER rating and 2 ton capacity. This heat pump condenser runs quietly with a low vibration so it won't interrupt your daily activities. Included with this unit is pre-charged with R-410A refrigerant, an environmentally friendly option that does not harm the ozone layer like more traditional refrigerants. The all-aluminum condenser coil provides low airflow resistance, efficiently transfers heat, and is protected from damage with louvered panels on all four sides.

This Trane RunTru Central Heat Pump also has safety features built into the system to protect your family and keep the appliance working properly. These safety precautions include over temperature and overpressure protection.

This outdoor unit has a small footprint, measuring 28.6 high, 25.6 wide, and 25.6 deep. For durability and strength, the Trane RunTru Central Heat Pump is housed in a galvanized steel cabinet that is treated with a weather-resistant powder paint finish. The cabinet's corner panels are pre-painted, and all of the panels are tested with a 1,000 hour salt spray to make sure the casing can withstand the test of time, even in places with high air salinity.

To clean the heat pump's exterior, wipe it down with soap and water. If the unit develops stubborn stains, use a stronger household detergent. No specialty materials are required. If you live in a coastal area, the manufacturer recommends regularly wiping down the exterior with fresh water to remove accumulated salt.

The Trane RunTru Cased Evaporator Coil in this 2 Ton 15 SEER 40K BTU 96% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System is practical, durable, and efficient. This coil has a 1.5 to 2 ton capacity, and like the air conditioner in this set it uses the eco-friendly R-410A refrigerant. The coil's refrigerant is controlled with a factory installed piston.

The cabinet housing the Trane RunTru Cased Evaporator Coil is galvanized steel and fully insulated to keep your system running efficiently. The cabinet's drain pan protects your floor from moisture that is created during the air conditioning process, is double-sloped, and can withstand high temperatures.

The Trane RunTru 2 Stage Gas Furnace in this 2 Ton 15 SEER 40K BTU 96% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System has a 40,000 BTU capacity, 2-3 ton nominal air flow, and 96% annual fuel utilization efficiency (AFUE). This system provides affordable, reliable service even in periods of high use.

The multiport, inshot burners in the Trane RunTru 2 Stage Gas Furnace work reliably and quietly to keep your home comfortable for many years while reducing unnecessary noise. While this gas furnace arrives ready to install for use with natural gas, you can easily convert the appliance for liquified petroleum (LP) gas with a separate conversion kit.

This gas furnace can be installed in one of three configurations depending on your home's requirements: upflow, horizontal left, or horizontal right. This gas furnace is designed to easily fit in tight spaces like closets or basements. The dimensions of this model in this split system are 34 high, 17.5 wide, and 28.75 deep. Since these are industry standard dimensions, this unit is compatible with larger, high-efficiency coils and other common accessories.

Both the primary and secondary heat exchangers inside a Trane RunTru 2 Stage Gas Furnace are made of cycle tested, heavy gauge tubular stainless steel that quickly transfers heat to warm the air in your home. The Trane RunTru 2 Stage Gas Furnace operates with an efficient constant torque blower motor (ECM) that is a better option than a standard PSC motor. The ECM motor has nine speeds and can easily switch speeds on demand to meet your home's needs.

The low energy blower in a Trane RunTru gas furnace is designed exclusively for this line of appliances, and it improves the airflow efficiency in addition to being durable and easy to clean. The blower ensures gas fumes are discharged outdoors. It also uses a silicon nitride hot surface ignition system to light the main burners instead of a traditional pilot light. The more modern ignition system is safer and eliminates the having to check and relight the pilot.

This gas furnace features Integrated System Control, which is a solid state device that continuously monitors for presence of flame. The operational program for the Integrated System Control allows you to manage the gas furnace's limit sensors, blowers, gas valve, and flame control. The control unit also includes self diagnostics to make it easier to service. For enhanced safety, the Trane RunTru 2 Stage Gas Furnace has a dual solenoid combination gas valve and regulator.

Protecting this gas furnace is a heavy gauge steel wrap-around cabinet that has an attractive baked-on enamel finish for extra durability. All installation configurations of this appliance provide two venting options, and the cabinet has no knockouts.