2 Ton 15 SEER 60K BTU 96% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System - Upflow/Horizontal

No matter the weather outside, keep comfortable with this 2 Ton 15 SEER 60K BTU 96% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System that includes a heat pump, an evaporator coil, and a gas furnace. These three practical and efficient appliances work together to deliver a complete HVAC solution that will meet your needs.

The Trane RunTru Central Heat Pump in this 2 Ton 15 SEER 60K BTU 96% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System cools your home efficiently with its 14 SEER rating and 2 ton capacity. This heat pump condenser runs quietly with a low vibration so it won't cause a disturbance to your daily activities.

This unit is pre-charged with R-410A refrigerant, an environmentally friendly refrigerant that does not harm the ozone layer like more traditional options. The all-aluminum condenser coil provides low airflow resistance, efficiently transfers heat, and is protected from damage with louvered panels on all four sides.

This Trane RunTru Central Heat Pump has safety features built into the system to protect your home and family in addition to ensuring the appliance works properly. These safety measures include over temperature and overpressure protection.

This outdoor unit has a small footprint, measuring 28.6 high by 25.6 wide by 25.6 deep. For strength and protection, the Trane RunTru Central Heat Pump is housed in a galvanized steel cabinet that is treated with a durable weather-resistant powder paint finish. The cabinet's corner panels are pre-painted, and all cabinet panels are tested with a 1,000 hour salt spray to make sure the casing can withstand the test of time, even in places with high air salinity.

To clean the heat pump's exterior, simply wipe it down with a clean rag, soap, and water. If the unit develops stubborn stains, you can use a stronger household detergent. No specialty materials are required. If you live in a coastal area, the manufacturer recommends regularly wiping down the casing with fresh water to remove accumulated salt.

The Trane RunTru Cased Evaporator Coil in this 2 Ton 15 SEER 60K BTU 96% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System is practical, durable, and efficient. This coil has a 1.5 to 2 ton capacity, and like the air conditioner in this set, it uses the eco-friendly R-410A refrigerant. The coil's refrigerant is controlled with a factory installed piston.

The cabinet housing the Trane RunTru Cased Evaporator Coil is galvanized steel and fully insulated to keep your system running efficiently. The cabinet's drain pan protects your floor from moisture created during the air conditioning process. The drain pan is double-sloped and can withstand high temperatures.

The Multi Speed Trane RunTru Gas Furnace in this 2 Ton 15 SEER 60K BTU 96% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System features multiport, inshot burners that will provide your home with many years of efficient, quiet service. This gas furnace has a 60,000 BTU capacity, 3 ton nominal air flow, and 80% annual fuel utilization efficiency (AFUE) that can keep your utility bills low during seasons of high use.

The gas furnace in this split system is easy to move, can be installed in tight spaces like basements or closets, and works well with large, high-efficiency coils. The unit's dimensions are 34 high by 17.5 wide by nearly 29 deep. It can be installed in one of four configurations: upflow, downflow, horizontal left, or horizontal right. If you need to run on liquified petroleum (LP) gas, you can purchase a separate conversion kit to easily switch from natural gas.

This gas furnace uses an efficient constant torque blower motor that has nine speeds instead of the typical PSC motor. The heat exchanger in a Multi Speed Trane RunTru Gas Furnace is made of durable and cycle tested heavy gauge tubular aluminized steel that efficiently transfers heat to warm your rooms quickly. This single-stage, non-condensing gas furnace uses a centrifugal combustion fan to evenly distribute heat through your home. The power vent blower uses minimal energy and discharges gas fumes outdoors.

This gas furnace does not use a pilot light that constantly burns. Instead, the Multi Speed Trane RunTru Gas Furnace features a silicon nitride hot surface ignition system that lights the main burners on demand only when needed.

The integrated control for this gas furnace helps you manage and maintain setup functions, system status, and diagnostics, all on a digital display. The control unit is a solid state device that continuously monitors the gas furnace for the presence of flame to ensure your home and family are safe.

The cabinet housing the Multi Speed Trane RunTru Gas Furnace is made of durable galvanized steel, designed to be energy efficient with its Air-Tite™ design, and certified to have less than 1.4% air leak per ASHRAE standards. The heavy gauge steel cabinet wraps around the furnace to give additional strength, and every installation orientation has two venting options and no knockouts.