3 Ton 15 SEER 100K BTU 95% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System - Upflow/Horizontal
Shop All RUNTRU

This product has been discontinued.
Recommended Alternative:
Accessories
Description / Documents
The 3 Ton 15 SEER 100K BTU 95% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System provides straightforward and reliable performance that will keep your family comfortable no matter the time of year. This split system includes a heat pump, evaporator coil, and gas furnace to meet your heating and cooling needs.
This Trane RunTru Central Heat Pump has a 14 SEER rating and a 3 ton cooling capacity to ensure you are always comfortable at home. This heat pump has a low vibration that creates little noise. The unit will work unnoticed, running smoothly in the background of your daily life.
This heat pump is factory charged with R410-A refrigerant, which is better for the atmosphere than traditional refrigerants. This heat pump's refrigeration is controlled with a condenser fan, compressor contactor, low and high pressure switches, and a TXV that maintains a constant heat for optimal performance.
Internal overcurrent protection and over temperature protection keep the scroll compressor in the Trane RunTru Central Heat Pump running safely. The direct drived outdoor propeller fan in this appliance is dynamically and statically balanced. This Trane RunTru Central Heat Pump uses an all aluminum condenser coil that efficiently transfers heat and provides low airflow resistance. Louvered panels protect the coil on all four sides.
The condenser has a cabinet made of heavy gauge, galvanized steel that is strengthened with a weather-resistant powder paint finish. Each cabinet panel is put to a 1,000 hour salt spray test that ensures the casing is durable enough for the outdoor elements, including high air alinity. The dimensions are 28.6 high by 34.3 wide by 34.3 deep.
With a Trane RunTru Multiposition Cased Evaporator Coil, you can expect a low cost, long lasting, and efficient appliance. The evaporator coil in this split system has a 3 to 3.5 ton capacity. It uses R-410A, the same environmentally friendly refrigerant used in this split system's heat pump. The refrigerant in this appliance is orifice controlled with a factory installed piston, and the refrigerant connections are brazed fittings.
The Trane RunTru Multiposition Cased Evaporator Coil is made entirely of aluminum and can be moved in multiple positions to tailor it to your installation needs. This evaporator coil is approved for use in manufactured and mobile homes though they can be used in any home or business arrangement. The dimensions are 22.5 high by 21 wide by 21.5 deep.
The cabinet that houses this evaporator coil is made of durable and long lasting galvanized steel. The casing is fully insulated to ensure your system works efficiently. The unit includes a double-sloped drain pan that is made to withstand high temperatures and protects your floor from moisture created during the air conditioning process.
To stay warm during the winter months, the Trane RunTru Multi Speed Gas Furnace in this split system is an excellent solution. This unit distributes warmed air throughout your home and is efficient, well built, and dependable. This particular Trane RunTru Multi Speed Gas Furnace has a 100,000 BTU capacity, 4-5 ton nominal air flow, and a 95% annual fuel utilization efficiency (AFUE). With these capabilities, this gas furnace is able to provide affordable, reliable heating service whenever you need it.
The multiport, inshot burners operate quietly and reliably to reduce background noise. The furnace is built for use with natural gas, but you can easily convert the unit for LP gas with a separately purchased conversion kit. Install it in upflow, horizontal left, or horizontal right. It can fit into tight spaces, and measures 34 high by 21 wide by 28.75 deep.
This single-stage, non-condensing Trane RunTru Multi Speed Gas Furnace is designed to safely and efficiently meet your home's heating needs. This appliance runs with an efficient constant torque blower motor (ECM) that has nine speeds. The silicon nitride hot surface ignition system in a Trane RunTru Multi Speed Gas Furnace does not run continuously like a traditional pilot light. With this safe and modern ignition system you won't need to check and light the pilot.
Both of the gas furnace's heat exchangers are made with cycle tested, heavy gauge tubular stainless steel that quickly transfers heat. The Vortica II Blower is designed exclusively for Trane RunTru gas furnaces to improve airflow efficiency and ensure gas fumes are discharged outdoors. It also features an integrated system control that allows you to easily maintain and manage your system. This control unit is a solid state device that continuously monitors for the presence of flame, so you can trust your family. The unit also features a digital display for diagnostics that make the gas furnace easier to service.
A heavy gauge steel wrap-around cabinet with a durable and easy to clean baked-on enamel finish houses and protects the Trane RunTru Multi Speed Gas Furnace. Any installation configuration of this appliance has two venting options and the cabinet does not feature knockouts.
All three appliances in this 3 Ton 15 SEER 100K BTU 95% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System are designed, tested, and assembled in the USA.
From the Manufacturer
Customer Reviews / Q&A
Specifications
System Overview
| Model | A4HP4036A1000,A951X100CU5S,A4MXC3642AC6H |
|---|---|
| UPC | 850017455146 |
| AHRI Number | 204595916 |
| Gas Furnace Efficiency | 95% |
| Bundle Avg Coverage Area | 1,500 - 1,800 Sq Ft |
| Bundle Cooling Capacity | 3 Ton |
| Bundle Cooling Efficiency | 15 SEER |
| EER | 12.5 |
| Heat Pump Efficiency (HSPF) | 8.50 |
| Region Compatibility | North |
A951X100CU5SA Specifications:
| Model | A951X100CU5SA |
|---|---|
| UPC | 850017455306 |
| AHRI Number | 204606334 |
| Product Height (in) | 34 |
| Gas Furnace Efficiency | 95% |
| Product Length (in) | 28.75 |
| Configuration | Floor Mounted |
| Product Width (in) | 21 |
| Air Flow Direction | Horizontal, Upflow |
| Avg Coverage Area | 2,500 - 3,000 Sq Ft |
| Blower Motor | Multi Speed |
| Cooling Compatibility (up to) | 5 Ton |
| Electrical Phase | 1-Phase |
| Exhaust Pipe | Metal |
| Fuel Source | Natural Gas |
| Gas Valve | Single Stage |
| Max Overcurrent Protection | 15 amps |
| Weight (lbs) | 155.000000 |
| Primary Heating Capacity | 95,001 - 100,000 BTU |
| System Application Type | Central Split Systems |
| Voltage | 120 |
| Warranty | 5 Year Parts, 20 Year Heat Exchanger |
- Regular Price:
- Your Price:




