4 Ton 15 SEER 80K BTU 96% AFUE 2 Stage Variable Speed Trane RunTru Central Heat Pump & Gas Furnace Split System - Upflow/Horizontal

Stay comfortable indoors with a 4 Ton 15 SEER 80K BTU 96% AFUE 2 Stage Variable Speed Trane RunTru Central Heat Pump & Gas Furnace Split System no matter the weather outside. This central heat pump condenser, cased evaporator coil, and 2 stage gas furnace combination is designed for homeowners looking for an affordable and durable solution to all their heating and cooling needs.

With a 4 ton cooling capacity and a 14 SEER rating, the Trane RunTru Central Heat Pump Condenser will work to make sure your family is comfortable all year long. This system can efficiently cool when outdoor temperatures are as high as 115°F.

Factory charged with R410-A refrigerant, this heat pump condenser runs with a refrigerant that is more eco-friendly than traditional options. Refrigeration in this Trane RunTru Central Heat Pump Condenser is controlled with a TXV that maintains a constant heat for optimal performance, a compressor contactor, a condenser fan, and high and low pressure switches.

The scroll compressor in this appliance features a low operating pressure and a centrifugal oil pump. The compressor features overcurrent and over temperature protection to ensure the system is operating safely. The condenser coil is all aluminum, provides low resistance to airflow, and efficiently transfers heat to provide enhanced performance. Louvered panels protect the coil on all four sides. The dimensions are 32.6 high by 234.3 wide by 34.3 deep.

This heat pump condenser is housed and protected in a cabinet made of heavy gauge, galvanized steel that is treated with a weather-resistant powder paint finish for enhanced durability. Each casing panel is proved to withstand the elements with a 1,000 salt spray test.

The Trane RunTru Cased Evaporator Coil in this 4 Ton 15 SEER 80K BTU 96% AFUE 2 Stage Variable Speed Trane RunTru Central Heat Pump & Gas Furnace Split System is efficient, durable, and affordable. This appliance has a 3.5 to 5 ton capacity, and uses R-410A refrigerant, the same environmentally-friendly refrigerant used in this split system's heat pump condenser. The measurements of the cased evaporator coil in this split system are 30.7 high by 21 wide by 21.5 deep.

The Trane RunTru Cased Evaporator Coil is housed in a cabinet made of durable galvanized steel that is fully insulated for improved efficiency and waste reduction. The evaporator coil cabinet has a drain pan that protects your floors from moisture created during the air conditioning process, is double-sloped, and can withstand high temperatures.

The Trane RunTru 2 Stage Gas Furnace in this 4 Ton 15 SEER 80K BTU 96% AFUE 2 Stage Variable Speed Trane RunTru Central Heat Pump & Gas Furnace Split System heats your home efficiently with its 80,000 BTU capacity, 5 ton nominal air flow, and 96% annual fuel utilization efficiency (AFUE). The furnace's multiport inshot burners operate consistently and quietly, humming in the background of your daily life to keep your home comfortable.

The American Gas Association has certified this Trane RunTru 2 Stage Gas Furnace for use with natural or liquefied petroleum (LP) gas. This unit's standard setup is for use with natural gas, but it can be easily converted to operate with LP gas with a separate conversion kit.

The heat exchangers in this gas furnace are heavy gauge tubular stainless steel that is cycle-tested and corrosion resistant, and the secondary heat exchanger is made of specialty 29-4C™ stainless steel that reclaims heat from flue gases to improve efficiency.

The blower motor in a Trane RunTru 2 Stage Gas Furnace will keep your family warm when temperatures begin to drop. With its variable speeds, the blower motor can create enough airflow for most heating and cooling requirements and improves the system's energy usage.

This Trane RunTru 2 Stage Gas Furnace features an integrated system control that continuously monitors for the presence of flame. This solid state device has an exclusively designed operational program that allows you to manage your system. The integrated control system display shows self diagnostic information to help troubleshoot if needed.

Rather than a continuously burning pilot light, the Trane RunTru 2 Stage Gas Furnace starts on demand with a silicon nitride hot surface ignition system. This modern ignition system lights the main burners only when needed and eliminates waste. Not only is this ignition system safer than a pilot light, it also eliminates having to check and relight the pilot.

A heavy gauge steel cabinet protects the Trane RunTru 2 Stage Gas Furnace. Its dimensions are 34 high by 21 wide by 28.75 deep. Moving this gas furnace for installation is easy due to its size, which allows you to install it in tight spaces such as short basements or small closets. This model has three setup options: upflow, horizontal left, or horizontal right. Each of these configurations includes two venting options and no cabinet knockouts.

The manufacturer certifies that this furnace leaks 1.4% or less of nominal air conditioning, in compliance with ASHRAE standards. The Trane RunTru 2 Stage Gas Furnace is also Fan Energy Rating (FER) compliant, and its limit setting and rating data were established and approved under American National Standards Institute (ANSI) conditions.

All three appliances in this 4 Ton 15 SEER 80K BTU 96% AFUE 2 Stage Variable Speed Trane RunTru Central Heat Pump & Gas Furnace Split System are designed, tested, and assembled in the USA.