Up to 6 months 0% APR Financing Available! Learn More about financing options >

This product has been discontinued.

The manufacturer has discontinued this product permanently. Please see the alternative product below.
Out of stock
Loading...
Accessories
Description / Documents

A 5 Ton 14.5 SEER 100K BTU 96% AFUE 2 Stage Variable Speed Trane RunTru Central Air Conditioner & Gas Furnace Split System may be the answer to your residential heating and cooling needs. You can trust this efficient and affordable split system to last for many seasons. The three appliances included in this split system are a Trane RunTru Central Air Conditioner, 2 Stage Gas Furnace, and Cased Evaporator Coil.

With the Trane RunTru Central Air Conditioner in this 5 Ton 14.5 SEER 100K BTU 96% AFUE 2 Stage Variable Speed Trane RunTru Central Air Conditioner & Gas Furnace Split System, you get a 5 ton cooling capacity and a 14 SEER rating. This appliance can cool a home of up to approximately 3,300 square feet. This air conditioner is factory pre-charged with the environmentally friendly R-410A refrigerant, which doesn't damage the ozone layer.

High pressure switches, a condenser fan, and a scroll compressor work together to control the refrigerant in this air conditioner. As a safety precaution and to ensure your system works properly, the compressor has over temperature and overpressure protection. The Trane RunTru Central Air Conditioner operates quietly in the background because its compressor creates minimal vibration.

This air conditioning system features a propeller fan and an all aluminum coil that efficiently transfers heat, provides low airflow resistance, and is protected on all four sides by louvered panels.

This air conditioner is housed in a cabinet made of heavy gauge, galvanized steel and painted with a weather-resistant finish. A 1,000 hour salt spray test is used to test the durability of this casing. The largest of the Trane RunTru Central Air Conditioner Split System models, the dimensions of this appliance are 36.6 high by 34.3 wide by 34.3 deep.

The Trane 2 Stage Gas Furnace will keep you warm when temperatures begin to fall and is affordable, dependable, and built to last. The furnace will stream warm air throughout your space, ensuring you and your family are comfortable during the winter months.

The Trane RunTru 2 Stage Gas Furnace in this system will heat your home with its 100,000 BTU capacity, 5 ton nominal air flow, and 96% annual fuel utilization efficiency (AFUE), which meets utility rebates and can reduce your utility bill. The gas furnace's multiport inshot burners run quietly and efficiently, humming along in the background of your daily life without making unnecessary noise.

With a certification from the American Gas Association, this Trane RunTru gas furnace can be used with natural or LP gas. The unit's default setup is with natural gas, but you can easily convert it for LP gas use with a separately purchased conversion kit.

The blower motor in this appliance reduces your home's energy use and features variable speeds. The primary heat exchanger is made of heavy gauge tubular stainless steel that is cycle-tested and corrosion resistant. The secondary heat exchanger is made of specialty 29-4C™stainless steel that can reclaim heat from flue gases and improve your system's efficiency.

For increased safety, the Trane RunTru 2 Stage Gas Furnace features an integrated system control that continuously monitors for the presence of flame. This solid state device operates with an exclusively designed operational program, so you can manage your system. The integrated control system also includes a display that shows self diagnostic information that can help you troubleshoot when needed.

Instead of using a continuously burning pilot light found in most traditional gas furnaces, this gas furnace uses a silicon nitride hot surface ignition system that lights the main burners on demand, reducing fuel usage. This more modern ignition system is safer than a pilot light and eliminates the chore of checking and relighting the pilot. For additional safety, this gas furnace uses a dual solenoid combination gas valve and regulator.

The cabinet for the Trane RunTru 2 Stage Gas Furnace is made of heavy gauge steel that wraps around the unit for extra strength and protection. The dimensions of the specific model in this 5 Ton 14.5 SEER 100K BTU 96% AFUE 2 Stage Variable Speed Trane RunTru Central Air Conditioner & Gas Furnace Split System are 34 high by 21 wide by 28.75 deep. These measurements are standard for the HVAC industry, which means this gas furnace is compatible with larger, high-efficiency coils and other common accessories.

With its manageable size, this Trane RunTru 2 Stage Gas Furnace can be easily moved and installed out of the way in tight spaces such as small closets or short basements. This unit has three setup options: upflow, horizontal left, or horizontal right. Each of these configurations has two venting options and does not include cabinet knockouts. The manufacturer certifies that this Trane RunTru gas furnace leaks 1.4% or less of nominal air conditioning and is in compliance with ASHRAE standards.

For a long lasting solution to keeping your space comfortable, choose an efficient and durable Trane RunTru Cased Evaporator Coil. This appliance can work well in any home arrangement no matter its size with its 3.5 to 5 ton capacity.

This system uses R-410A refrigerant, the same refrigerant used in the air conditioner in this 5 Ton 14.5 SEER 100K BTU 96% AFUE 2 Stage Variable Speed Trane RunTru Central Air Conditioner & Gas Furnace Split System. The refrigerant in the coil is controlled with a TXV. The coil is made entirely of aluminum and can be moved to multiple positions, allowing you to tailor the equipment to meet your specific needs.

The measurements of this specific cased evaporator coil are 30.7 high by 21 wide by 21.5 deep. The Trane RunTru Cased Evaporator Coil is housed in a cabinet made of durable and long lasting galvanized steel. The cabinet is fully insulated so your system works efficiently and with minimal waste. The evaporator coil cabinet includes a drain pan that protects your floors from moisture created during the air conditioning process. The drain pain also has a double-sloped design and can withstand high temperatures.

Customer Reviews / Q&A
Specifications

System Overview

Model A4AC4060A1000A,A952V100CU5SAB,A4MXC4260AC3HA
UPC 850017455085
AHRI Number 204599826
Gas Furnace Efficiency 96+%
Bundle Avg Coverage Area 2,500 - 3,000 Sq Ft
Bundle Cooling Capacity 5 Ton
Bundle Cooling Efficiency 14.5 SEER
EER 11.7
Region Compatibility Nationwide

A952V100CU5SB Specifications:

Model A952V100CU5SB
UPC 850017455245
AHRI Number 204606322
Product Height (in) 34
Gas Furnace Efficiency 96+%
Product Length (in) 28.75
Configuration Floor Mounted
Product Width (in) 21
Air Flow Direction Horizontal, Upflow
Avg Coverage Area 2,500 - 3,000 Sq Ft
Blower Motor Variable Speed
Cooling Compatibility (up to) 5 Ton
Electrical Phase 1-Phase
Exhaust Pipe Metal
Fuel Source Natural Gas
Gas Valve Two Stage
Max Overcurrent Protection 15 amps
Weight (lbs) 155.000000
Primary Heating Capacity 95,001 - 100,000 BTU
System Application Type Central Split Systems
Voltage 120
Warranty 5 Year Parts, 20 Year Heat Exchanger

Ways to Save as You Shop

IWAE Insiders ProgramIWAE Insiders Program
IWAEPros ProgramIWAEPros Program
Financing with IWAEFinancing with IWAE
IWAE Rebate FinderIWAE Rebate Finder
Labor Warranty at IWAELabor Warranty at IWAE
Loading...
Loading...