5 Ton 14.5 SEER 120K BTU 95% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System - Upflow/Horizontal

Stay comfortable year round with this 5 Ton 14.5 SEER 120K BTU 95% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System, a practical and efficient heating and cooling system for your home. This split system set features a central heat pump condenser, cased evaporator coil, and multi speed gas furnace. Each of these high quality appliances are affordable and built to last many years.

This Trane RunTru Central Heat Pump Condenser is the largest in the RunTru line with its 5 ton cooling capacity and 14 SEER rating. This heat pump condenser is capable of cooling your space when temperatures outside are as high as 115°F or as low as 55°F. For additional low ambient cooling, separate accessories are required.

This Trane RunTru Central Heat Pump Condenser creates a low vibration, reducing background noise. For the environmentally conscious, this heat pump condenser is factory charged with R410-A refrigerant, an greener refrigerant option that doesn't damage the ozone layer. This refrigerant is controlled with a compressor contactor, condenser fan, high and low pressure switches, and a TXV that maintains a constant heat for optimal performance.

The scroll compressor in this heat pump condenser features over temperature and overcurrent protection. The all aluminum condenser coil provides low resistance to airflow and efficiently transfers heat. The coil is protected on all four sides with louvered panels, and the outdoor propeller fan is dynamically and statically balanced. The dimensions of this specific Trane condenser are 44.6 high by 34.3 wide by 34.3 deep.

Protecting this heat pump condenser is a cabinet made of heavy-gauge, galvanized steel. This casing is coated with a weather-resistant powder paint finish, and the cabinet panels are tested with a 1,000 hour salt spray test to ensure its durability outdoors, including in coastal areas with high air salinity.

The Trane RunTru Cased Evaporator Coil in this 5 Ton 14.5 SEER 120K BTU 95% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System has a 3.5 to 5 ton capacity. This evaporator coil is entirely aluminum, and it can be moved to multiple positions, allowing you to tailor the equipment for your home's specific needs. It uses R-410A refrigerant, the same eco-safe refrigerant used in the listed condenser. The refrigerant is controlled with a TXV.

The Trane RunTru Cased Evaporator Coil measures 30.7 high, 24.5 wide, and 21.5 deep. The coil is housed in a cabinet made of durable galvanized steel that is fully insulated for efficiency. This unit includes a double-sloped drain pan that protects your floors from moisture created during the air conditioning process.

The single-stage, non-condensing Trane RunTru Multi Speed Gas Furnace is designed to safely meet your family's heating needs. The model in this 5 Ton 14.5 SEER 120K BTU 95% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System has a 120,000 BTU capacity, 5 ton nominal air flow, and 95% annual fuel utilization efficiency (AFUE), so you can trust it will provide you with affordable, reliable heating service whenever you need it.

This gas furnace has multiport, inshot burners that operate smoothly to reduce background noise while quietly keeping your home comfortable during the cooler months. The default fuel source for this appliance is natural gas, but you can easily convert it for use with liquified petroleum (LP) gas with a conversion kit.

Your installation needs can be easily met with three possible configurations: upflow, horizontal left, or horizontal right. The Trane RunTru Multi Speed Gas Furnace can fit into small areas like short basements or closets. It measures 34 high by 24.5 wide by 28.75 deep.

The Trane RunTru Multi Speed Gas Furnace operates with an efficient nine-speed constant torque blower motor (ECM) that is able to quickly switch speeds on demand. The gas furnace uses a silicon nitride hot surface ignition system that does not run continuously like a traditional pilot light. With this modern ignition system, you won't ever have to check or relight the pilot.

Both heat exchangers in this gas furnace are made with cycle tested, heavy gauge tubular stainless steel that can quickly transfer heat to keep your home warm. The Vortica II blower is designed exclusively for Trane RunTru gas furnaces and improves airflow efficiency. It is simple to remove and clean, and the blower ensures gas fumes are discharged outdoors.

The Trane RunTru Multi Speed Gas Furnace features an integrated system control that allows you to easily monitor your appliance. This control unit is a solid state device that continuously scans for the presence of flame, so you can trust your home and family are safe. The control system's operational program provides a way to manage the furnace's functions, including the limit sensors, blowers, and gas valve. The unit also features a digital display that can show diagnostics, making the unit easier to service when needed.

The heavy gauge steel wrap-around cabinet for the Trane RunTru Multi Speed Gas Furnace features a durable baked-on enamel finish, and every installation option has two venting options without knockouts. The 5 Ton 14.5 SEER 120K BTU 95% AFUE Multi Speed Trane RunTru Central Heat Pump & Gas Furnace Split System is made in the USA.