3 Ton 14 SEER 80K BTU 96% AFUE Multi Speed Trane RunTru Central Air Conditioner & Gas Furnace Split System - Upflow/Horizontal
Get $100 Cash Back on Your Qualifying Purchase
- Spend over $1000 on heating and air equipment.
- Share this video publicly on your existing Facebook news feed. https://youtu.be/O4nmrlbF0aA
- Email a screenshot of the video on your facebook profile to [email protected] along with your order number.
- Get a check mailed to you for $100.
Limited Time Offer. Act Now!
Rebate only valid for qualifying purchases made after September 19, 2022 until further notice. Rebate claim limited to one per customer. Purchase must be made prior to sharing video. Please allow 1-2 weeks for processing. May not be used in conjunction with any other offer or discount. Video privacy setting must be public.
Contact an expert now.
80K BTU 96% AFUE Multi Speed Trane RunTru Gas Furnace - Upflow/Horizontal - 17.5" Cabinet
For a solution that will quickly heat your home during the winter months, choose a 80K BTU 96% AFUE Multi Speed Trane RunTru Gas Furnace - Upflow/Horizontal - 17.5inch Cabinet. This appliance distributes warmed air throughout your space and can be trusted for its quality construction, reliable dependability, and cost-saving efficiency.
This Trane RunTru gas furnace model has an 80,000 BTU capacity, a 3-4 ton nominal air flow, and a 96% annual fuel utilization efficiency (AFUE). With this efficient capacity, you can trust this furnace will provide affordable, reliable service whenever you need it.
Inside the furnace are multiport, inshot burners that operate quietly and reliably to reduce unnecessary background noise and keep your home comfortable for many years to come. This 80K BTU 96% AFUE Multi Speed Trane RunTru Gas Furnace - Upflow/Horizontal - 17.5inch Cabinet is shipped ready to install for use with natural gas, but you can easily convert the appliance for liquified petroleum (LP) gas with a separate conversion kit.
With this Trane RunTru model, you have flexibility and installation options. This system can be installed in one of three configurations: upflow, horizontal left, or horizontal right.
Thanks to its slim size, you can easily fit this gas furnace in a tight space like a closet or basement. The dimensions of this specific model, including the exterior cabinet, are 34 high, 17.5 wide and 28.75 deep. These measurements are industry standard, so this unit is compatible with larger, high-efficiency coils and other common accessories.
Each piece of this single-stage, non-condensing 80K BTU 96% AFUE Multi Speed Trane RunTru Gas Furnace - Upflow/Horizontal - 17.5inch Cabinet is designed to safely and efficiently meet your home's heating needs.
ECM Motor: Trane RunTru gas furnaces operate with an efficient constant torque blower motor (ECM) that features nine speeds and produces enough airflow for most heating and cooling setups. Depending on your thermostat's settings, this ECM motor can easily switch speeds on demand to meet your home's needs.
Hot Surface Ignition System: Instead of a traditional pilot light, Trane RunTru gas furnaces use a silicon nitride hot surface ignition system to light the unit's main burners. With this safer and more modern ignition system you no longer have the chore of checking and lighting the pilot each new season.
Heat Exchangers: Both the primary and secondary heat exchangers in this gas furnace are made of cycle tested, heavy gauge tubular stainless steel that quickly transfers heat and warms the air. Stainless steel is more durable and corrosive-resistant than aluminized steel used in other furnaces.
Vortica II Blower: The low energy blower in this appliance is designed exclusively for Trane RunTru gas furnaces. The Vortica II blower improves airflow efficiency and is easy to remove and clean as needed. This component ensures gas fumes are discharged outdoors so the air you breathe is safe and fresh.
With an Integrated System Control, this Trane RunTru gas furnace gives you total control that is easy to manage. This control system is a solid state device that continuously monitors for the presence of flame when the system is in a heating mode, so you can trust your family is safe.
The operational program for the Integrated System Control allows you to manage many of the gas furnace's functions, including the furnace limit sensors, blowers, and gas valve. The control unit also displays self diagnostics that make the unit easier to service.
For an additional level of safety, this Trane RunTru gas furnace has a dual solenoid combination gas valve and regulator.
Protecting this furnace is a heavy gauge steel wrap-around cabinet that has a durable, attractive baked-on enamel finish. No matter the installation configuration you need, the casing will offer two venting options. The cabinet does not feature knockouts.
This 80K BTU 96% AFUE Multi Speed Trane RunTru Gas Furnace - Upflow/Horizontal - 17.5inch Cabinet is manufactured at a facility in Trenton, New Jersey. The manufacturer certified that this Trane RunTru gas furnace leaks 1% or less when all the inlets, outlet, and drains are sealed, proving its energy efficiency that earned it an Energy Star certification. The American Gas Association certified this Trane RunTru gas furnace for both natural and LP gas, and the limit setting and rating data were approved using the American National Standards Institute's (ANSI) requirements.
Model | A4AC4036D1000,A951X080BU4S,4MXCB004AC6 |
---|---|
UPC | 850017455054 |
AHRI Number | 206031067 |
Gas Furnace Efficiency | 96+% |
Bundle Avg Coverage Area | 1,500 - 1,800 Sq Ft |
Bundle Cooling Capacity | 3 Ton |
Bundle Cooling Efficiency | 14 SEER |
EER | 12.2 |
Region Compatibility | Nationwide |
California Residents | see Prop 65 WARNING |
A4AC4036D1000 Specifications:
Model | A4AC4036D1000 |
---|---|
UPC | 647535843797 |
Product Height (in) | 32.6 |
Avg Coverage Area | 1,500 - 1,800 Sq Ft |
Product Length (in) | 29.8 |
Compressor | Single Stage |
Product Width (in) | 29.8 |
Cooling Capacity | 3 Ton |
Electrical Phase | 1-Phase |
Line Set Connection Type | Sweat |
Liquid Line Size | 3/8 inch |
Max Overcurrent Protection | 25 amps |
Weight (lbs) | 183.000000 |
Refrigerant | R-410a |
Cooling Efficiency (SEER2) | 14 |
Suction Line Size | 3/4 inch |
System Application Type | Central Split Systems |
Voltage | 240 |
Warranty | 10 Year Parts, 10 Year Condenser Coil, 10 Year Compressor |
Region Compatibility | Nationwide |
A951X080BU4S Specifications:
Model | A951X080BU4S |
---|---|
UPC | 850017455283 |
AHRI Number | 204606332 |
Product Height (in) | 34 |
Gas Furnace Efficiency | 96+% |
Product Length (in) | 28.75 |
Configuration | Floor Mounted |
Product Width (in) | 17.5 |
Air Flow Direction | Horizontal, Upflow |
Avg Coverage Area | 2,000 - 2,400 Sq Ft |
Blower Motor | Multi Speed |
Cooling Compatibility (up to) | 4 Ton |
Electrical Phase | 1-Phase |
Exhaust Pipe | Metal |
Fuel Source | Natural Gas |
Gas Valve | Single Stage |
Max Overcurrent Protection | 15 amps |
Weight (lbs) | 135.000000 |
Primary Heating Capacity | 75,001 - 80,000 BTU |
System Application Type | Central Split Systems |
Voltage | 120 |
Warranty | 5 Year Parts, 20 Year Heat Exchanger |
4MXCB004AC6 Specifications:
Model | 4MXCB004AC6 |
---|---|
UPC | 762530151903 |
Product Height (in) | 20 |
Air Flow Direction | Horizontal, Vertical |
Product Length (in) | 21 |
Cooling Capacity | 1.5 Ton, 2 Ton, 2.5 Ton, 3 Ton |
Product Width (in) | 17.5 |
Line Set Connection Type | Sweat |
Liquid Line Size | 3/8 inch |
Weight (lbs) | 55.000000 |
Refrigerant | R-410a |
Suction Line Size | 3/4 inch |
Warranty | 5 Year Parts, 10 Year Evaporator Coil |
Shipping & Delivery
Effective and efficient shipping practices are critical for an online business. That’s why we try our best to ship products within 24-36 hours of receiving your order. It’s why we have no hidden fees, send you tracking information as soon as we receive it, and work with our freight carriers to have units delivered as quickly as possible once they leave our warehouse. If you ever have any questions about shipping, call us at 1-270-575-9595. Notice that shipping outside of the continental US require an additional shipping fee.
Shipping Damage & Missing Items
Unpack and inspect ALL packages for damaged or missing items before accepting your shipment. If any damage is found, note this on the delivery receipt. Although Ingrams Water & Air Equipment is NOT responsible for shipping damage, we can assist with filing a claim against the shipping carrier to cover the cost of damages. Any damages or missing items have to be noted on the delivery receipt prior to signing for and accepting your shipment in order to file a claim. Do not let the delivery driver rush you. It is your right to inspect each and every item. If the delivery driver refuses to wait or doesn't allow you to inspect your items prior to signing, please call us immediately at 1-270-575-9595 and our claims department can offer assistance.
Login and Registration Form