What is the MrCool Advantage Warranty? - Ask the Expert Episode 262

Today's question comes from David.

"Hey Dan, what is the warranty on the MrCool Advantage?"

It is two year parts and one year compressor.

So, why is that less than on the DIY model? Well, because the Advantage model is an economy line product, which means it's a cheaper product.

5 comments (view/add)
  • Joe Austin
    Joe Austin
    Posted on 7/5/2021

    I have a 2400 btu DIY MrCool. If I run the unit on full auto the coils on the inside unit freeze up. If I place the unit on low medium or high fan it works like a charm. Any ideas on what’s causing it to freeze up on auto.

  • Dan Danowski
    Dan Danowski from Ingrams
    Posted on 7/12/2021

    The two most common reasons for an AC system to freeze are either insufficient air flow (clogged filters, coil, or fan operational problems) or low charge. If the filters and the coil are clean and the fan seems to operate properly, then a technician would need to use gauges to check charge.

  • patrick brown
    patrick brown
    Posted on 6/4/2021

    do you need an a/c tech to bleed the lines or need to add Freon with a mr cool unit .how does a diy person bleed lines

  • Dan Danowski
    Dan Danowski from Ingrams
    Posted on 6/5/2021

    The Advantage is meant to be installed by a HVAC professional. It is not intended for do-it-yourself installation. The lines do need to be properly vacuumed and the system charged.

  • Rudy R.
    Rudy R.
    Posted on 5/24/2021

    Excellent...I was unclear on the market for the Advantage models

* All fields required.

Your email address will not be published. Comments will display after being approved by our moderators. Comments may be edited for clarity.